Environmental Test

These equipments create environment of various pressure, temperature, and humidity for reliability testing of wide variety of products, such as semiconductors, electronic parts, functional materials and resin materials.

Pressure cooker   Monitoring Pressure Cooker   Pressure Cooker   (Saturated Type/ Anti-condensation Type)   Pressure Cooker (Unsaturated Type) HAST   Pressure Cooker   (Unsaturated Type: Lower-Humidity Negative Pressure)   Ultra-wide Range Pressure Cooker Tile Humidity-resistance Test Equipment (High Pressure Vessel) Pressure Shock & Thermal Shock Test Equipment Super-high Pressure Vessel Equipment Temperature & Humidity Cycle Test Equipment

Degassing/Prepreg

These equipments are used to remove air or gas which gets mixed in during the laminating process of various materials such as films, glass laminates and prepregs, as well as to increase adhesive strength.

Autoclave (Constant Temperature Pressurization Equipment)   Hinge Type   Tunneled Type   Slider Type   In-line Type Autoclave with Press Function Vacuum and Pressure Oven Liquid Crystal Degassing Equipment

Heat Treatment

These equipments are used for degassing, hardening, dehydration, sintering, oxide-film generation, etc. in the manufacturing processes of electronics products, such as semiconductors and liquid crystal displays. They are also used for processing of new materials and functional materials.

Autoclave (Constant Temperature Pressurization Equipment)   Hinge Type   Tunneled Type   Slider Type   In-line Type Vacuum Oven High-pressure Annealing Equipment Large-size Vacuum Oven Vacuum and Pressure Oven Heating and Fast Cooling Oven (Conveyor Oven) High Temperature Annealing Equipment (Vacuum Type/ Pressurizing Vacuum Type) Pressure Dehydration Equipment Vacuum Dehydration Equipment Vacuum Dehydration Equipment for Chip Parts Vacuum and Pressure Hot Press VPHP Series Oxidization-H2 Reducing Furnace

Hardening

These equipments are used to harden various materials, such as resin for electronic-parts molds and plastic.

Autoclave (Constant Temperature Pressurization Equipment)   Hinge Type   Tunneled Type   Slider Type   In-line Type

Injection/Impregnation

These equipments are used to inject liquid crystal into LCD panels. They are also used to impregnate impregnant into object materials such as carbon fiber and 3-dimensional textiles so as to produce highly strong composite materials and high temperature heat resistant materials.

Liquid Crystal Filling Equipment High Temperature Pressure Impregnation Equipment Vacuum and Pressure Impregnation Equipment

Sublimation & Purification

This equipment is used to extract high-purity organic material such as luminescent materials for organic EL displays.

Sublimation & Purification Equipment

Polymerization

This equipment is used to produce high- quality plastic materials through polymerization reaction.

Pressure Polymerization Equipment

Vulcanization

This equipment is used to prevent generation of roughness and pits on surface during vulcanization process such as that of rubbers, that are cause by solvent of high steam pressure.

Pressure Vulcanization Equipment

Degreasing

This equipment is used to prevent crack of ceramics and degrease in a short time, by pressurization during wax removal process before ceramic calcination.

Pressure Degreasing Furnace

Super-critical Experimentation

These equipments are used to produce supercritical fluids and verify various phenomena. They are expected to develop for wide variety of applications in the future.

Super-critical CO2 Experimentation Equipment Super-critical Water Experimentation Equipment

↑ Page Top